[time-nuts] Tom's PICDiv?
John Ackermann N8UR
jra at febo.com
Thu Jan 5 08:24:03 EST 2017
Sorry, I missed the "complete unit" part... the TAPR products do require
some soldering. The TADD-2 does have a case available if that helps.
On 1/5/2017 8:21 AM, John Ackermann N8UR wrote:
> Hi Bob --
> TAPR has two boards that provide life support for Tom's PICDiv chips:
> The "TADD-2" is a six-channel divider allowing each channel to have its
> rate independently set from a common source:
> The "T2-Mini" is a tiny board that provides a single channel of PPS (or
> whatever you want) from an RF input:
> On 1/5/2017 12:34 AM, Bob Stewart wrote:
>> Hi all,
>> I was wondering if anyone makes a nice, complete unit from one of
>> Tom's PICDivs; preferably with an external 10MHz input, a 10MHz output
>> and a 1PPS output? It would be nice if it also accepted a 1PPS in to
>> sync the PIC's output to an external 1PPS source, but that's not a
>> necessity. I've got something kludged together here that I can drive
>> from my Cs standard for testing, but I was hoping for something a bit
>> more purpose made if anyone makes one? Not looking for a kit or just
>> a board, nor do I have any interest in making/marketing such a unit.
>> Bob -----------------------------------------------------------------
>> GFS GPSDO list:
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to
>> and follow the instructions there.
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> and follow the instructions there.
More information about the time-nuts