[time-nuts] Looking for info on Austron 1100-1 OXCO
Dave M
dgminala at mediacombb.net
Sun Jul 2 17:46:06 EDT 2017
Thanks for the info, Roger
Dave M
Roger Tilsley wrote:
> Greetings Dave,
>
> While I do not know the Austron 1100 oscillators, I have experience
> of Austron 1120 oscillators. I suspect the 1100 and 1120 are very
> similar. I am sending a data sheet for the 1120 and an operating
> spec for the 1120 L. Note that the 1120Ls does not have varicap fine
> frequency trimming. Austron were consistent with the pin-out for IO
> plug-in oscillators. The 1120s have soldered base to can joints and
> I have successfully take them apart for repair (extra capacitance!).
> The 1120s are very good.
>
> Regards,
> Roger T.
>
>
> On Fri, 30 Jun 2017 12:14:14 -0500, "Dave M"
> <dgminala at mediacombb.net> wrote:
>
>> Does anyone have any data on the Austron 1100-1 5MHz OXCO? Pinout &
>> specs would be great.
>>
>> Thanks!
>> Dave M
>> _______________________________________________
More information about the time-nuts
mailing list