[time-nuts] Fwd: Fwd: HP5061B Ion Current
Donald E. Pauly
trojancowboy at gmail.com
Wed Mar 22 14:32:05 EDT 2017
I have posted two HP patents on the cesium beam tube at
http://gonascent.com/papers/hp/US3397310.pdf . Both are of academic
interest. The first claims that the cesium oven operates at 60°-70° C.
This is a tiny heating compared to a 1,000° filament on a power
transmitting tube. I say that it can be cycled a million times with
no problem of thermal cracking.
---------- Forwarded message ----------
From: John Miles <john at miles.io>
Date: Tue, Mar 21, 2017 at 5:41 PM
Subject: Re: [time-nuts] Fwd: HP5061B Ion Current
To: Discussion of precise time and frequency measurement
<time-nuts at febo.com>, rward0 at aol.com
That's some very nice work, Donald. Looking back, I have junked one
or two Cs tubes that might have been usable if I'd thought through the
problem of high ion pump current as you and KB7APQ seem to have done.
Another good reason to raise the lockout threshold would be to cut
down on the repetitive ionizer filament cycling that the tube will
otherwise undergo when you first fire up the oven. That phenomenon
always makes me reeeeally nervous.
-- john, KE5FX
Miles Design LLC
> When we overrode the cesium lockout at 29 μA or so of ion current, we
> needed only minor front panel adjustments for beam current of 20 μA.
> (We shorted across A15 R-4.) Our last ion current before power supply
> modifications at risen to 39 uA. Beam current has been stable.
More information about the time-nuts