[time-nuts] Fast Rise/Fall Time Pulser
bob91343 at yahoo.com
Tue Oct 10 16:08:38 EDT 2017
I built one, and later saw a simpler one. Very fast, very simple. I think my total cost was a few cents.
Google TDR DIY pulser. One from an old magazine (Jim Williams) looks pretty good, using collector breakdown of a 2N2369. The one I made used one IC and a few resistors.
On Tuesday, October 10, 2017 1:02 PM, Brooke Clarke <brooke at pacific.net> wrote:
How does it work.
When I was working with microwave semis it was either a tunnel diode or a Step Recovery Diode.
-------- Original Message --------
> There has been discussion recently about generating fast rise/fall time pulses by various means. Here is a link to a
> Leo Bodnar device that will provide <40 ps rise/fall time, 50% duty cycle, 10 MHz pulses:
> This is built on a small PWB with integral BNC connector, powered by 5 vdc through a USB B connector; a trigger output
> is provided. Price is US$68.
> I've ordered one of these for testing.
> Is anyone here using one of these?
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
More information about the time-nuts