[time-nuts] FRK

paul swed paulswedb at gmail.com
Tue Feb 27 09:26:49 EST 2018


Thanks for the pictures.
Curious on the rb lamp.
There seem to be 2 pins from the side. Is that a lamp start igniter?
Regards
Paul
WB8TSL

On Tue, Feb 27, 2018 at 9:01 AM, Bob kb8tq <kb8tq at n1k.org> wrote:

> Hi
>
> Judging from the date codes on some of the parts, I’d guess that
> your FRL-L is from 1982. I’m only looking at a few parts that came
> through well enough in the picture to read (and that have what look
> like rational date codes …).
>
> Bob
>
> > On Feb 27, 2018, at 5:30 AM, Attila Kinali <attila at kinali.ch> wrote:
> >
> > On Mon, 26 Feb 2018 20:04:56 -0800
> > "Tom Van Baak" <tvb at LeapSecond.com> wrote:
> >
> >> Bert's M100 Rb teardown photos are now here:
> >>
> >> http://leapsecond.com/bert/m100.htm
> >
> > For those, who would like to see the rest of M100/FRK,
> > I just took pictures of my FRK-L that was sitting on my
> > desk for way too long:
> >
> > http://time.kinali.ch/Efratom_FRK-L/
> >
> > Yes, there are only the pictures of the four PCBs from outside.
> > I didn't want to take the FRK further appart, as that would
> > require a soldering iron, and I really should be doing something
> > else.
> >
> >                       Attila Kinali
> >
> > --
> > It is upon moral qualities that a society is ultimately founded. All
> > the prosperity and technological sophistication in the world is of no
> > use without that foundation.
> >                 -- Miss Matheson, The Diamond Age, Neil Stephenson
> > _______________________________________________
> > time-nuts mailing list -- time-nuts at febo.com
> > To unsubscribe, go to https://www.febo.com/cgi-bin/
> mailman/listinfo/time-nuts
> > and follow the instructions there.
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/
> mailman/listinfo/time-nuts
> and follow the instructions there.
>


More information about the time-nuts mailing list