[time-nuts] Trimble Thunderbolt Issue
ewkehren at AOL.com
Sat Jan 27 09:44:29 EST 2018
Do not toss, first check output of OCXO if good keep if you do not fiend the problem. If no output replace. If L H shows that it works bring OCXO output directly.Bert Kehren
Sent from my Galaxy Tab® A
-------- Original message --------From: Richard Solomon <w1ksz at outlook.com> Date: 1/26/18 1:39 PM (GMT-05:00) To: time-nuts <time-nuts at febo.com> Subject: [time-nuts] Trimble Thunderbolt Issue
I have a T-Bolt whose 10 MHz output has dropped off to about 6 mV. Using T-Bolt Mon,
all the Alarms are Green and it shows Tracking 3 or 4 Satellites (small Hockey Puck Antenna).
Without a schematic I am lost as to where to look.
Anyone have any suggestions ? I had to toss an otherwise working T-Bolt.
Thanks for any assistance,
Sent from Outlook<http://aka.ms/weboutlook>
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
More information about the time-nuts