[time-nuts] TrueTime XL-AK Issues

[Bob kb8tq]

Hi

My guess would be that they are not in a mode that allows them to lock. Some
GPSDO’s require a “start” command. Others hold off locking until a site survey
is complete ( or they have verified the last survey is correct ).

Bob

> On May 23, 2018, at 1:31 PM, Richard Solomon <w1ksz at outlook.com> wrote:
> 
> I have had two of these sitting on the shelf for years. Today I decided to see if they work.
> 
> It's a slow week !!
> 
> 
> I hooked them up to my external GPS Antenna through my Symmetricon Splitter and
> 
> looked at the 10 MHz output on my HP 5334B (reference input derived from a Trimble
> 
> T-Bolt).
> 
> 
> They both show a number of Satellites, but one reads 4.7 Hz low while the other reads
> 
> 1.3 Hz low. I expected better.
> 
> 
> Any thoughts on what would cause such a large deviation from 10 Mhz ?
> 
> 
> Thanks for any replies,
> 
> 
> 73, Dick, W1KSZ
> 
> 
> Sent from Outlook<http://aka.ms/weboutlook>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.