[volt-nuts] Solartron 7081 Test Leads
gsteinba52 at aol.com
gsteinba52 at aol.com
Thu Aug 4 23:33:40 UTC 2011
Sorry guys, I can never figure out how to use these lists (from the digest).
Hi Joe,
The cal switch is by Microswitch. I bought a couple of them since I was in the same situation
as yourself (used box, no key). Bill suggested breaking out the old switch as the mounting tabs
are really hard to get to.
Before doing that I simply tried the new switch key in the existing cal switch. Quickest fix I've
every made. The same key also worked on a 7061 carcass.
Obviously the keys are not for security, and I would imagine a Cal Lab would go berserk if they
had to maintain hundreds of individual keys, one for each instrument.
Send me your address and I'll put a key in the mail - if it doesn't work I'll sell you the switch
for a very reasonable price.
Jerry
?
?
?
?
------------------------------
?
Message: 8
Date: Thu, 4 Aug 2011 17:43:08 -0500
From: "J. L. Trantham" <jltran at att.net>
To: "'Discussion of precise voltage measurement'" <volt-nuts at febo.com>
Subject: Re: [volt-nuts] Solartron 7081 Test Leads
Message-ID: <FCCFDBA084184EF49B2A23183466C4C4 at yourb25d9e178c>
Content-Type: text/plain;??? charset="us-ascii"
?
Bill,
?
Thanks for all the info.
?
I ordered the connectors from Kensington Electronics using the part numbers
posed on an earlier email.? Very friendly folks but they want a 'company'
name.? I used my practice.
?
http://www.keiconn.com/
?
They have a $50 minimum order.? One connector and cable clamp meets that
requirement.
?
I would appreciate the part number of the switch you ordered.? Also, if you
could send me a picture of the connector end and the 'probe' end of the
cables you found, I would appreciate it.
More information about the volt-nuts
mailing list