[volt-nuts] Adjustment of Fluke 752A Reference Divider

Stephen Grady grady.steve at gmail.com
Thu Aug 18 19:16:56 UTC 2011


Peter,

Thanks, that doc has the procedure in it. It is the long term drift
correction procedure.

It wasn't a long shot after all. Much appreciated.

Steve Grady

-----Original Message-----
From: xyzzypdx at gmail.com [mailto:xyzzypdx at gmail.com] On Behalf Of Pete
Lancashire
Sent: Friday, 19 August 2011 5:07 AM
To: grady.steve at gmail.com
Subject: Re: [volt-nuts] Adjustment of Fluke 752A Reference Divider

Long shot ..

https://docs.google.com/viewer?a=v&pid=explorer&chrome=true&srcid=0B86wM5n5R
E3kMjRjMjUyYzEtMjU3My00Nzg0LTg2N2QtNjljM2VjYjczMjUx&hl=en_US



On Thu, Aug 18, 2011 at 11:56 AM, Stephen Grady <grady.steve at gmail.com>
wrote:
> Fellow Volt-nuts,
>
>
>
> I have a couple of Fluke 752A Reference Dividers at work that the front
> panel adjustments of the Hammond Divider are outside of its adjust range
> (that is the will not adjust into balance). I remember at my previous
> laboratory the Fluke manual described a procedure to adjust the divider
back
> into its adjustment range by soldering (or unsoldering some links in the
> divider circuitry. The present Fluke manual that is downloadable from
> Fluke's website no longer has this section in the manual and asks that the
> divider be returned to Fluke for repair. Does anyone have access to a pdf
> version of the old manual or just this section of the manual that they can
> email me, post online or provide a link? It would be much appreciated.
>
>
>
> I would really like to get these dividers working again.
>
>
>
> Thanks,
>
>
>
>
>
> Steve Grady
>
> grady.steve at gmail.com
>
> Sydney Australia
>
>
>
>
>
> _______________________________________________
> volt-nuts mailing list -- volt-nuts at febo.com
> To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
> and follow the instructions there.
>




More information about the volt-nuts mailing list