[volt-nuts] VS 330 arrived
Joseph Gray
jgray at zianet.com
Thu Aug 8 23:18:50 EDT 2013
Yesterday I borrowed the Fluke 189 from work and comparied it against my HP
3478A. Today, from another source, I borrowed a 4.5, 5.5 and 6.5 digit DMM
and checked them all against the VS330.
None of these DMMs have been calibrated in a while. On various ranges, all
of them showed either exactly what the VS330 was set to, or +/- 1 digit,
worst case. More evidence that my HP 3478A needs calibration, and that the
VS330 does not. I wish I knew someone with a 7 or 8 digit DMM.
Joe Gray
W5JG
On Thu, Aug 8, 2013 at 3:48 PM, Charles Steinmetz <csteinmetz at yandex.com>wrote:
> Joe wrote:
>
> Although I'm not sure for the right-most switch. I'm in the noise of
>> the LSD on my best DMM for that one.
>>
>
> You are very likely down in the noise/uncertainty of the VS330 itself, as
> well. The LSD on these provides some resolution, but no accuracy. That is
> true even of the much more accurate Fluke 332 and 335, as well.
>
> Best regards,
>
> Charles
>
>
>
>
> ______________________________**_________________
> volt-nuts mailing list -- volt-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/**
> mailman/listinfo/volt-nuts<https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts>
> and follow the instructions there.
>
>
More information about the volt-nuts
mailing list