[volt-nuts] HP 3457A

Mitch Van Ochten mitch at vincentelectronics.com
Sun Aug 11 14:51:57 EDT 2013


In 2002 I bought a used HP 34401A.  Sent it in to Agilent (Loveland, CO) for
calibration in March 2005 and they sent it back with both "as found" and "as
left" sets of data.  This is what the "as found" data said:

100mV = -4 ppm
1.0V = +3 ppm
10.0V = +5 ppm
100V = +4 ppm
1000V = +6 ppm

They adjusted it to be perfect.  Sent it again to Agilent in April 2009.
Had to send it to Roseville, CA this time.  (They told me Loveland
calibrations were reserved only for their higher precision meters.) The "as
found" data from Roseville showed the following:

100mV = +7 ppm
1.0V = +1 ppm
10.0V +1 ppm
100V +23 ppm
1000V = +19 ppm

In my opinion the 34401A is an excellent value and this one drifts far less
than it's specified values. Your mileage may vary.


Regards,

mitch

-----Original Message-----
From: volt-nuts-bounces at febo.com [mailto:volt-nuts-bounces at febo.com] On
Behalf Of Joseph Gray
Sent: Sunday, August 11, 2013 2:00 PM
To: Discussion of precise voltage measurement
Subject: Re: [volt-nuts] HP 3457A

Would a 34401A be a better choice, over a 3457A for a budding volt-nut? It
is newer and smaller, and the ebay pricing is similar. Would having that
extra digit via GPIB on the 3457A really be of any practical value?

Joe Gray
W5JG



On Sun, Aug 11, 2013 at 10:29 AM, Charles Steinmetz
<csteinmetz at yandex.com>wrote:

> Chuck wrote:
>
>  I think the statement is awkward English, but what I think he is 
> trying
>> to say is that:
>> 1) the instrument will be recalibrated
>> 2) after the instrument is verified, by the calibration lab, to be 
>> working within specs,
>> 3) a NIST traceable calibration certificate will be mailed.
>>
>
> The seller does his own calibrations.  Also, if he sent it out for 
> cal, it would come back with a certificate -- why wouldn't he just 
> leave the certificate in the box when he shipped the unit to the 
> buyer, instead of mailing it later?  Something very strange seems to be
going on.
>
> Best regards,
>
> Charles
>
>
>
>  WE WILL RE-CALIBRATED THE UNIT BEFORE SHIPPING AND A NIST TRACEABLE
>>> CALIBRATION
>>> CERTIFICATE, WILL BE PROVIDED AFTER ITEM IS RECEIVED AND IS ACCEPTED 
>>> AS WORKING WITH IN SPECS. WE WILL MAIL OUT THE CERTIFICATE.
>>>
>>
>
>
> ______________________________**_________________
> volt-nuts mailing list -- volt-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/**
>
mailman/listinfo/volt-nuts<https://www.febo.com/cgi-bin/mailman/listinfo/vol
t-nuts>
> and follow the instructions there.
>
>
_______________________________________________
volt-nuts mailing list -- volt-nuts at febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
and follow the instructions there.



More information about the volt-nuts mailing list