[volt-nuts] Volt Nuts Rookie
frank.stellmach at freenet.de
Tue May 21 02:53:17 EDT 2013
Currently, my 34401A shows a similar behaviour, on the rear connectors only.
2W Ohm there drifts up and down, several 10 digits in 6 digit mode,
whereas the measurement is stable on the front connectors.
4W Ohm is stable even on rear connectors.
Obviously, the front/rear switch is oxydized, or otherwise faulty.
Please, check the measurement on the rear connectors also.
More information about the volt-nuts