[volt-nuts] The averaging reference

Todd Micallef tmicallef at gmail.com
Sat Dec 20 18:13:46 EST 2014

I believe the 1281 uses the LTZ1000. The datasheet mentions dual references.

My 4920 has both a ltz1000 and a lm399. I think you can find pics of the
1281 dual ref setup on eevblog.

I would not be surprised if the 8508a has a similar configuration.


On Saturday, December 20, 2014, Richard Moore <richiem5683 at gmail.com> wrote:

> The Datron 1081/1082 are 7-1/2 digit meters. The zeners are two pair of
> two zeners in series to get the ref voltage up high enough. In the two
> 1081s I had, they worked quite well, ref’d to the two Fluke 732As I had at
> the time. But not 8-1/2 digit grade, I don’t think. I have no idea what the
> 127x/128x sereis use; probably the LTZ1000A...
> _______________________________________________
> volt-nuts mailing list -- volt-nuts at febo.com <javascript:;>
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
> and follow the instructions there.

More information about the volt-nuts mailing list