[volt-nuts] What made a HP3458A so expensive
wpgold3637 at att.net
Sat Jan 18 17:17:05 EST 2014
In fact if you look at a 1982 HP catalog you will see that the 3456A was
selling for around $3,700 and given inflation the 3458A is still a pretty
good bargain when it was introduced in 1989. In 1989 the 3456A was selling
for $4,600 while the 3458A was selling for $5,900. I wonder if there will
ever be a "3459A" 9.5 digit meter? With a super miniture Josehpson Junction
for a reference?
----- Original Message -----
From: "Tom Knox" <actast at hotmail.com>
To: "Discussion of precise voltage measurement" <volt-nuts at febo.com>
Sent: Saturday, January 18, 2014 1:29 PM
Subject: Re: [volt-nuts] What made a HP3458A so expensive
Actually in spite of it's high price I feel the 3458A represents a bargain.
When it was introduced in 1989 it was $5900. A price it held for decades.
Although designed in
then 80's it's accuracy is still unsurpassed. The 8846A is much less
expensive because it has only about a quarter the parts. With few that
are hand selected and/or aged. And all though both meter have well
executed designs the result is the 3458A has about a magnitude greater
accuracy. And anyone in Metrology can attest to the fact that the cost
of accuracy is exponential. But the thought I wanted to contribute to the
dialog is the real value of the 3458A is the body
of knowledge built around the thousands of 358A's some running
continuously for nearly three decades. The characteristics of the 3458A
are perhaps the best documented of any electronic instrument ever made.
That is priceless. When comparing that body of knowledge to individual
units I have found every 3458A is a little different and seem to each
have their own personality. In a side note, recently I owned what appeared
to be the original 3458A. I cannot remember the serial number, but it had
the numbered stickers identifying the boards that can be seen in the
original service manual. And it was still working flawlessly.
> Date: Sat, 18 Jan 2014 17:41:26 +0100
> From: frank.stellmach at freenet.de
> To: volt-nuts at febo.com
> Subject: [volt-nuts] What made a HP3458A so expensive
> the 3458A now is in production for about 25 years , and only around 50k
> units have been sold.
> (That's an estimation by Joe Gellers series number collection)
> As the 3458A is a niche product with homeopathic series volume, the
> development, verification/validation, special reliability engineering,
> selection and burn-in measures, QA costs had to be paid per unit in the
> To my opinion, especially the 3458A was designed mainly for military
> requirements (Tamb 55°C). The military was willing to pay a premium (HP
> = High Price) at that time. So HP was able to realize that price.
> All that development budget is long paid, and after end of the Cold War,
> the military does not order so many devices anymore, what caused the
> problems of the T&M business (finally => Keysight, urgh!).
> But as that market is tight, competitors are few, so the price is not
> going down, instead it's increasing over the years, from $5900 to around
> It would be interesting to calcualte the BOM of the 3458A.
> As they use many custom specific components, it should be relatively
> There is no parameter in the HP3458A specifications, that the device has
> to be powered constantly to meet the specs.
> Those very high 8ppm/yr. drift might apply only during continuous
> During power down, the LTZ should not drift at all, as the ageing
> mechanism is driven by temperature.
> But there might be (there are indeed) considerable hysteresis effects.
> I have set the temperature of my HP3458A to ~ 60°C, I shut it down after
> usage, and the periodical comparison to 3 other references shows a drift
> of less than 1ppm/year.
> volt-nuts mailing list -- volt-nuts at febo.com
> To unsubscribe, go to
> and follow the instructions there.
volt-nuts mailing list -- volt-nuts at febo.com
To unsubscribe, go to
and follow the instructions there.
More information about the volt-nuts