[volt-nuts] Voltage Reference.

[Dan Kemppainen]

Andreas,

If I proceed down this path, it will be a learning experience. As with
most learning projects, a bit of 'overkill' is usually present.
It's just plain old fun to over engineer something! :)

The LM399 does look like a nice package. Do they all come with the
thermal shield, or is that an option that needs to be purchased separately?

Dan


On 11/5/2014 12:00 PM, volt-nuts-request at febo.com wrote:
> Message: 1
> Date: Tue, 04 Nov 2014 19:20:09 +0100
> From: Andreas Jahn <Andreas_-_Jahn at t-online.de>
> To: Discussion of precise voltage measurement <volt-nuts at febo.com>
> Subject: Re: [volt-nuts] Voltage Reference.
> Message-ID: <545918D9.2020105 at t-online.de>
> Content-Type: text/plain; charset=utf-8; format=flowed
> 
> Hello Dan,
> 
> If you dont need the low noise and long term stability of the LTZ1000 then
> the LM399 will do the job without special resistors (like T.C. less than 
> 5ppm/K).
> 
> The only thing that I recommend is to do a good thermal isolation for 
> the references.
> 
> With best regards
> 
> Andreas