[volt-nuts] Completion of LED Mod's for the Fluke 845AB & 845AR Null Meter.
wb6bnq
wb6bnq at cox.net
Sun Nov 23 22:18:19 EST 2014
Hi Dallas,
You could load it up to Didier's repository at ko4bb.com. He maintains
a large inventory for Timenuts and related stuff.
Alternately, I would also like to receive you mods as well.
Thank you,
Bill....WB6BNQ
Dallas Smith wrote:
> How do I make my RTF attachment available to Volt-nuts? I do not trust
> cloud servers and the like.
>
> Dallas
>
> On 11/23/2014 1:29 PM, Dallas Smith wrote:
>
>> To All,
>>
>> The final modification of the Fluke null meters with LED's is
>> completed. The results is impressive, keeping the basic original
>> circuit of the meters. My rev 8 AR version has a double diode in the
>> output stage which seems to remove the zeroing hysteresis around a
>> zero reading was also made to my 845AB. Implementing two 1.2v
>> reference diodes in the zeroing circuit greatly improved the zero
>> drift for the zeroing control. There were also changes to the
>> feedback response by changing two capacitors. If anyone is
>> interested, please E-mail me at my personal address.
>>
>> dosmith at outlook.com
>>
>> Dallas
>> _______________________________________________
>> volt-nuts mailing list -- volt-nuts at febo.com
>> To unsubscribe, go to
>> https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
>> and follow the instructions there.
>>
>>
>
> _______________________________________________
> volt-nuts mailing list -- volt-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
> and follow the instructions there.
>
More information about the volt-nuts
mailing list