[volt-nuts] PCB fasteners for Datron meters (David C. Partridge)

[Todd Micallef]

I searched Amazon with both Southco part numbers and they appear to show
that they are available for order.

$0.23 for the grommet  http://amzn.com/B01DYYNHP8

$0.21 for the plunger  http://amzn.com/B01DYYL66K

Shipping is not cheap at a fixed $6.50 for each part number. Selecting a
total of 30 each does not affect shipping.

Of course, the "In Stock" status could be wrong ...

On Tue, Apr 26, 2016 at 6:01 PM, David C. Partridge <
david.partridge at perdrix.co.uk> wrote:

> I fear that none of those WCL fasteners will fit the 3/16 hole (0.188"
> abt. 4.8mm)
>
> Dave
>
> -----Original Message-----
> From: volt-nuts [mailto:volt-nuts-bounces at febo.com] On Behalf Of Todd
> Micallef
> Sent: 26 April 2016 21:12
> To: Discussion of precise voltage measurement
> Subject: Re: [volt-nuts] PCB fasteners for Datron meters (David C.
> Partridge)
>
> Bill,
>
> Was it WCL ? West Coast Lockwashers has some push-pull rivets but I have
> no idea if they will work.
>
>
> https://www.wclco.com/plastic-components/panel-fasteners/panel-fasteners-plastic-rivets/pushpull-rivets-h-type/
>
> They don't look the same but I wouldn't care as long as they were
> functional.
>
> _______________________________________________
> volt-nuts mailing list -- volt-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
> and follow the instructions there.
>