[volt-nuts] Meter...

[Dan Kemppainen]

Hi,

How much would you be asking for this?

Dan


On 10/31/2016 12:00 PM, volt-nuts-request at febo.com wrote:
> Message: 3
> Date: Mon, 31 Oct 2016 15:22:41 +0100
> From: Andrea Baldoni <	>
> To: volt-nuts at febo.com
> Subject: [volt-nuts] FS: NOS Agilent 34401A
> Message-ID: <20161031142241.GA27821 at sol.ermione.com>
> Content-Type: text/plain; charset=us-ascii
>
> Hello.
>
> Saturday I bought a 34401A. I was interested just in another instrument but
> the seller insisted to sell them only together, so I had bought this one also.
>
> The condition is very good, it has been sold to me as NOS but I cannot be sure.
> However, I checked calibration number and it's 35, means it has only the
> initial factory calibration, date April 11 2001. It's complete with rubber and
> handle, it's clean, without any scratch, display is bright, and everything is
> like you should expect from a, if not really NOS, lightly used instrument.
>
> I would keep it, if I had not already other two of them in the same condition
> in my lab, plus a switch unit with the same multimeter inside... so it will
> not end on an auction site: I offer here to the group and if no one is
> interested, I'll keep it.
>
> It's a US made Agilent marked version, with red and black binding posts (not
> the previous all red ones) but still square power button and rectangular shift
> key, software revision "11/05/02". Original paper User's guide and Service
> guide are included, as well as a power cord, CD with Intuilink software,
> original test lead kit still in the bag. The calibration certificate with
> test report is missing, and I don't have original box. All the rest of the
> standard accessories are there.
> Of course, calibration is absolutely expired. I have not enough equipment to
> verify if it's still inside limits in every range; besides that it seems to
> work correctly. Other questions, just ask.
>
> Note: it's identical to the other two I have, except that they have initial
> calibration two months earlier and serial some thousands lower.
> I didn't upgrade their firmware (and I don't think user can do
> it) thus the software revision date late than calibration is evidently
> normal for this batch.
>
> I can eventually ship everywhere but I prefer to ship inside EU.
>
> You can send your (reasonable) offers via mail.
>
> Best regards,
> Andrea Baldoni
>
>
> ------------------------------
>
> Subject: Digest Footer