[volt-nuts] Fluke 825AR schematic wanted?

[Jason Watson]

Just uploaded a copy to K04BB's manuals site.  Not sure how long it takes
him to approve them but it's up there.  Not the greatest scan, but it's the
best I could do with the equipment and the original I have.  Good luck.

On Feb 7, 2017 1:05 AM, "Hendrik" <don_hendi at gmx.de> wrote:

> Hello list,
>
> does any of you gentlemen posess a service manual for John Fluke's 825AR
> differential voltmeter? I got one together with a 801BR, and as the 801 is
> almost cured now which was some fun, i prepare to look into the other
> patient whose state is worse. The 825 seems to have the same power supply
> as the 801 and similar KVD and switching. However, the null detector is
> very different.
>
> (The center-zero instrument is stuck and the chopper is silent, so if i
> can't revive it as a diffvm, it will at least give a nice
> calibrator/voltage source.)
>
> best regards,
>
> Hendrik
>
>
>
> _______________________________________________
> volt-nuts mailing list -- volt-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/m
> ailman/listinfo/volt-nuts
> and follow the instructions there.
>