[volt-nuts] Banana jack shorting straps

John Allen john at pcsupportsolutions.com
Wed Nov 8 20:59:23 EST 2017


Tonight please.  J

PS: I am flat broke and scared shitless.

-----Original Message-----
From: volt-nuts [mailto:volt-nuts-bounces at febo.com] On Behalf Of Jeremy Nichols
Sent: Wednesday, November 08, 2017 8:57 PM
To: Discussion of precise voltage measurement
Subject: Re: [volt-nuts] Banana jack shorting straps

Previous <http://jokes.cc.com/funny-god/4028vq/incredible-confession>Next
<http://jokes.cc.com/funny-god/rltky3/greg-giraldo--on-islam>

Did you hear about the dyslexic, agnostic insomniac?

He stayed up all night wondering if there was a dog.



On Wed, Nov 8, 2017 at 2:20 PM Mark Sims <holrum at hotmail.com> wrote:

> Recently on EEVBLOG there was a thread where a guy mentioned that he was
> going to machine some shorting bars for banana jack out of copper.   I made
> the suggestion to gold plate them to avoid copper oxide issue.  Another guy
> mentioned making them like a PCB (like Fluke does).
>
> I did a little thinking and checking and am going to have some built.
> Probably 0.8 .. 1mm FR4 core, 15x35 mm, double sided 2 oz copper,  ENIG
> gold finish.   Anybody interested in some?   Fab cost goes down rather
> quickly with quantity.  Cost target is maybe $10 for 10 pieces shipped.
> OSHPARK cost would be around $5 for three boards on 1.6mm, 1 oz copper.
> _______________________________________________
> volt-nuts mailing list -- volt-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
> and follow the instructions there.
>
-- 
Sent from my iPad 4.
_______________________________________________
volt-nuts mailing list -- volt-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
and follow the instructions there.


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus



More information about the volt-nuts mailing list