[volt-nuts] HP3458 ADC integrator

Bruce Griffiths bruce.griffiths at xtra.co.nz
Fri Feb 23 17:40:02 EST 2018


Why do you think that the datasheet is wrong?

Its the same as the 1989 version.

A lot of the early wideband opamps didn't have high open loop gain.

Even the LT1220 only has about 7 - 15x more gain at rated load.

The LT1220 has a a pair of cascaded complementary symmetry emitter followers in its output stage compared to the single complementary symmetry emitter follower output stage of the LM6361.

Bruce

 

> 
>     On 24 February 2018 at 11:05 "David C. Partridge" <david.partridge at perdrix.co.uk> wrote:
> 
>         > > 
> >         The datasheet I have found (Natsemi Sept 1995) lists 550 V/V = 0.55 V/mV.
> >         Which I think is a bit low, but then, the opamp is old.
> > 
> >     > 
>     Check other datasheets, that's definitely wrong
> 
>     David
> 
>     _______________________________________________
>     volt-nuts mailing list -- volt-nuts at febo.com
>     To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
>     and follow the instructions there.
> 


More information about the volt-nuts mailing list