[volt-nuts] Vibrating reed electrometers

george g_einst at hotmail.com
Sat Mar 3 12:34:20 EST 2018


Hi all

To the best of my memory Keithley never made vibrating reed electrometers, the only one that I am aware of is the Varian Cary 401 which did use Sapphire insulators.  I was the European product line specialist for Varian Cary in the late 1960/1970 era and was involved with the 401.

George G6HIG 
________________________________________
From: volt-nuts <volt-nuts-bounces at febo.com> on behalf of volt-nuts-request at febo.com <volt-nuts-request at febo.com>
Sent: 03 March 2018 17:00
To: volt-nuts at febo.com
Subject: volt-nuts Digest, Vol 103, Issue 3

Send volt-nuts mailing list submissions to
        volt-nuts at febo.com

To subscribe or unsubscribe via the World Wide Web, visit
        https://nam02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.febo.com%2Fcgi-bin%2Fmailman%2Flistinfo%2Fvolt-nuts&data=02%7C01%7C%7Cb5818846d36e4ecd914908d581283c52%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636556932161076932&sdata=cp01qd%2FkRw4yYSLYOqJ8RwUF8oOxtdqLVOmDal7gBhs%3D&reserved=0
or, via email, send a message with subject or body 'help' to
        volt-nuts-request at febo.com

You can reach the person managing the list at
        volt-nuts-owner at febo.com

When replying, please edit your Subject line so it is more specific
than "Re: Contents of volt-nuts digest..."


Today's Topics:

   1. Re: Precision high resistance measurements / calibration of
      HP 4339B high-resistance meter. (ed breya)
   2. Re: Precision high resistance measurements /      calibration of
      HP 4339B high-resistance meter. (Mitch Van Ochten)


----------------------------------------------------------------------

Message: 1
Date: Fri, 2 Mar 2018 09:22:32 -0800
From: ed breya <eb at telight.com>
To: volt-nuts at febo.com
Subject: Re: [volt-nuts] Precision high resistance measurements /
        calibration of HP 4339B high-resistance meter.
Message-ID: <5f6e418c-649b-70e8-8502-facf1176f390 at telight.com>
Content-Type: text/plain; charset=utf-8; format=flowed

Oops - I think I didn't send this message properly yesterday - here goes
again. Ed

Yes, David, unless you go to very extreme measures, you won't see real R
values that have any practical meaning beyond E12 ohms or so. Most
practical insulation Rs may be around E12-E14 tops, unless you go to
sapphire. Up in that region, the R may be all within a material, or
include surface components like a film of dirt or moisture, or a
fingerprint.

E11 resistors can be made to fairly high precision, and maybe E12
nowadays. In the old days, higher values were made by stacking E11s -
like ten in series to get E12 with decent precision. The glass packaging
also limits how high it can go, due to leakage within and on the
surface. I once used a glass reed relay capsule as an ultra-high
resistance in a circuit. There was no precision or stability at all, but
it made a nice high resistor (probably E14-ish dry) even though there
was no element in there, and the circuit didn't care, as long as it was
very high, but not infinite.

The specs on this HP unit are likely just the most extreme capability
taking maximum voltage over minimum current resolution, but any
measurements would tend to be very noisy and unstable anyway. Also,
testing at the extreme 1 kV makes the numbers seem more impressive, but
the voltage coefficient of resistance will pretty much be unpredictable.

If this is a digital meter, then the other spec trick that tends to
obscure the real performance limit is that the ultimate resolution and
noise is that last digit - or even last two or three - that may may be
pretty jumpy, unless very long averaging time is used.

There may be newer, fancier electrometers nowadays, but Keithley used to
be the standard for these in the old days, before several digits of DVM
resolution complicated the specs. They had a vibrating capacitor
electrometer with all-sapphire input structure back in the 1970s/80s I
think, that was the epitome of electrometers. I forget the model number,
but vaguely recall that it could reach the aA region full scale - not
that last digit of resolution thing. It's long obsolete, and I don't
think they ever made anything actually better - only added DVM digits to
less capable, conventional semiconductor amplifier techniques. If you
can find info on it, it's an interesting read. I found a pdf of the
manual years ago, but have no idea where it is now, or what info may
still be around.

Ed



------------------------------

Message: 2
Date: Fri, 2 Mar 2018 20:41:10 -0500
From: "Mitch Van Ochten" <Mitch at vincentelectronics.com>
To: "'Discussion of precise voltage measurement'" <volt-nuts at febo.com>
Subject: Re: [volt-nuts] Precision high resistance measurements /
        calibration of HP 4339B high-resistance meter.
Message-ID: <014e01d3b290$b54948f0$1fdbdad0$@vincentelectronics.com>
Content-Type: text/plain;       charset="UTF-8"

Here are specs from an older General Radio Bridge for observation.

GR 1644-A specifications:

Resistance Range: 1 kΩ to 1000 TΩ (10^3 to 10^15 Ω) in ten ranges.
Accuracy: 10^3 Ω to 10^10 Ω, ±1 %. After self-calibration: 10^10 to
10^12 Ω, ±1%*; 10^13 Ω, ±2%; 10^14 Ω, ±10%; 10^15 Ω, ± one scale
division.
ΔR% Dial: ±5% range; accurate to ±0.2% or, for small changes,
to ±0.1%.
Test Voltage: Voltage accuracy is ±3% ±0.5 V.
Fixed Voltages** 10 20 50 100 200 500 1000 v

Best regards,

mitch

-----Original Message-----
From: volt-nuts [mailto:volt-nuts-bounces at febo.com] On Behalf Of ed breya
Sent: Friday, March 02, 2018 12:23 PM
To: volt-nuts at febo.com
Subject: Re: [volt-nuts] Precision high resistance measurements / calibration of HP 4339B high-resistance meter.

Oops - I think I didn't send this message properly yesterday - here goes again. Ed

Yes, David, unless you go to very extreme measures, you won't see real R values that have any practical meaning beyond E12 ohms or so. Most practical insulation Rs may be around E12-E14 tops, unless you go to sapphire. Up in that region, the R may be all within a material, or include surface components like a film of dirt or moisture, or a fingerprint.

E11 resistors can be made to fairly high precision, and maybe E12 nowadays. In the old days, higher values were made by stacking E11s - like ten in series to get E12 with decent precision. The glass packaging also limits how high it can go, due to leakage within and on the surface. I once used a glass reed relay capsule as an ultra-high resistance in a circuit. There was no precision or stability at all, but it made a nice high resistor (probably E14-ish dry) even though there was no element in there, and the circuit didn't care, as long as it was very high, but not infinite.

The specs on this HP unit are likely just the most extreme capability taking maximum voltage over minimum current resolution, but any measurements would tend to be very noisy and unstable anyway. Also, testing at the extreme 1 kV makes the numbers seem more impressive, but the voltage coefficient of resistance will pretty much be unpredictable.

If this is a digital meter, then the other spec trick that tends to obscure the real performance limit is that the ultimate resolution and noise is that last digit - or even last two or three - that may may be pretty jumpy, unless very long averaging time is used.

There may be newer, fancier electrometers nowadays, but Keithley used to be the standard for these in the old days, before several digits of DVM resolution complicated the specs. They had a vibrating capacitor electrometer with all-sapphire input structure back in the 1970s/80s I think, that was the epitome of electrometers. I forget the model number, but vaguely recall that it could reach the aA region full scale - not that last digit of resolution thing. It's long obsolete, and I don't think they ever made anything actually better - only added DVM digits to less capable, conventional semiconductor amplifier techniques. If you can find info on it, it's an interesting read. I found a pdf of the manual years ago, but have no idea where it is now, or what info may still be around.

Ed

_______________________________________________
volt-nuts mailing list -- volt-nuts at febo.com To unsubscribe, go to https://nam02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.febo.com%2Fcgi-bin%2Fmailman%2Flistinfo%2Fvolt-nuts&data=02%7C01%7C%7Cb5818846d36e4ecd914908d581283c52%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636556932161076932&sdata=cp01qd%2FkRw4yYSLYOqJ8RwUF8oOxtdqLVOmDal7gBhs%3D&reserved=0
and follow the instructions there.



------------------------------

Subject: Digest Footer

_______________________________________________
volt-nuts mailing list
volt-nuts at febo.com
https://nam02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.febo.com%2Fcgi-bin%2Fmailman%2Flistinfo%2Fvolt-nuts&data=02%7C01%7C%7Cb5818846d36e4ecd914908d581283c52%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636556932161076932&sdata=cp01qd%2FkRw4yYSLYOqJ8RwUF8oOxtdqLVOmDal7gBhs%3D&reserved=0

------------------------------

End of volt-nuts Digest, Vol 103, Issue 3
*****************************************


More information about the volt-nuts mailing list