[time-nuts] Prologix GPIB/USB converter help...
John Ackermann N8UR
jra at febo.com
Mon Apr 16 18:20:07 EDT 2007
Tom Van Baak said the following on 04/16/2007 05:41 PM:
>> In that case the new firmware will not be compatible at all. The new
>> hardware uses FTDI FT245R USB FIFO chip which has a parallel interface to
>> the micro. Host side USB drivers make it appear like a virtual serial port,
>> which is why all the serial port parameters can be ignored.
>>
>> Abdul
>>
>>
>> Hi Abdul,
>>
>> got it. Any chance you will make a GPIB-to-RS-232 version for us legacy guys
>> out there?
>>
>> thanks,
>> Said
>
> Abdul,
>
> I very much second Said's request. There are plenty of
> applications where the Prologix box would be used in an
> embedded environment. USB is a very bad choice in this
> case since it is a highly asymmetric interface (there are
> a million USB devices but pretty much only a full-blown
> PC can be a USB host).
>
> Allowing serial (RS232 or SPI or I2C) in addition to USB
> is a big plus. I'm sorry to hear your new version can't be
> hacked to support this. Do you have any extra pins on
> your controller? Could it be extended to support a serial
> interface? You can talk to Said or me offline if you want;
> but you unnecessarily shrink your market if you drop a
> serial interface.
I'll throw in a vote, too. While the USB version works OK for my
application, an RS-232 version that had an identical API would be very
useful.
John
More information about the time-nuts
mailing list