[time-nuts] Basic Stratum 1 question
GandalfG8 at aol.com
GandalfG8 at aol.com
Thu Aug 2 11:44:09 EDT 2007
In a message dated 02/08/2007 16:33:26 GMT Daylight Time,
jaredmorrisen at gmail.com writes:
I am having a debate with our CIO. He wrote in a memo about timing:
*Local hardware is to be considered Stratum 1, since it get time from its
own CMOS.*
I told him that absurd and that it can't be considered stratum 1.
--------------------------------------------
Hmmmmmmmm
So any dodgy PC clock is now Stratum 1 by his definition?
The following is just one quick example from a google search and came
from.......
http://www.endruntechnologies.com/stratum1.htm
----------------------------
What is Stratum 1?
In the world of NTP, stratum levels define the distance from the reference
clock. A reference clock is a stratum-0 device that is assumed to be accurate
and has lttle or no delay associated with it. The reference clock
synchronizes to the correct time (UTC) using long wave radio signals, GPS
transmissions, CDMA technology or other time signals such as WWV, DCF77, etc. Stratum-0
servers cannot be used on the network, instead, they are directly connected
to computers which then operate as stratum-1 servers.
A server that is directly linked to a stratum-0 device is called a stratum-1
server. This includes all time servers with built-in stratum-0 devices and
those with direct links to stratum-0 devices such as over an RS-232
connection or via an IRIG-B time code. The basic definition of a stratum-1 time
server is that it be directly linked (not over a network path) to a reliable
source of UTC time such as GPS, WWV, or CDMA transmissions. A stratum-1 time
server acts as a primary network time standard.
---------------------------------
See what he makes of that :-)
regards
Nigel
GM8PZR
More information about the time-nuts
mailing list