[time-nuts] bad lcd readout on austron 2100 loran

Brooke Clarke brooke at pacific.net
Thu Jun 28 23:03:00 EDT 2007

Hi Dan:

It may just be a bad connection.  You might un plug and mate each connector a 
few times including the boards, ribbon cables and if the LCD glass unplugs do 
it.  I've found in 99% of the cases where older equipment no longer works the 
problem is a bad connection.  More on that at:

and Austron stuff at:

Have Fun,

Brooke Clarke

Dan Durgin wrote:
> I have an Austron 2100F Loran-C clock receiver which works perfectly, but
> the lcd readout is dead or washed out. Any ideas on a replacement unit? The
> backlight still works fine. By the way, I recently bought on ebay and got
> working after some difficulty, an HP-113AR. Thanks to some folks here at
> time-nuts, I was able to verify replacement part numbers, for some missing
> parts. Thanks much.
> Daniel Durgin
> Ocean View, Hawaii
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.5.476 / Virus Database: 269.9.10/875 - Release Date: 6/27/2007
> 9:08 PM

More information about the time-nuts mailing list