[time-nuts] Low phase noise digital divider (in 600MHz to10MHz area)
didier at cox.net
Fri Jan 25 08:14:33 EST 2008
There was a thread some time ago just about that. It was probably 2007, so
if you look in the archives, you should find it.
I will look for it too, as I want to index it for future reference, and if I
find it first, I'll post it again.
> -----Original Message-----
> From: time-nuts-bounces at febo.com
> [mailto:time-nuts-bounces at febo.com] On Behalf Of Anders Time
> Sent: Friday, January 25, 2008 7:02 AM
> To: time-nuts at febo.com
> Subject: [time-nuts] Low phase noise digital divider (in
> 600MHz to10MHz area)
> Have been locking around for a good article on how to design
> a good Low phase noise digital divider(in 600MHz to 10MHz
> area), but the have not found any good literature. Today most
> people talk about regenerative dividers, but are a rather
> complex subject.
> Does anyone have experience in what logic family that have
> the lowest noise TTL, AC, HC, F etc?
> What is the upper limit for ECL diviers? My first idea was to
> use ECL to divide down to 100MHz area and then to use lower
> noise TTL to go down to 10MHz.
> What about edge-conditioning circuit at divider input? Have
> seen people talk about it, but no info what it does?
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.516 / Virus Database: 269.19.11/1242 - Release Date: 1/24/2008
More information about the time-nuts