[time-nuts] PCB for frequency dividers

[John Day]

At 06:34 PM 7/24/2008, you wrote:

Yikes, those are both expensive. http://myropcb.com/

Online quote system is very accurate. I have used them for 12x13inch 
6 layer, very reasonable and plenty of smaller 2 and 4 layer PCB's. 
They are reliable, speedy and accurate.

John

Try these people: S1D13513

>Check out MYLYDIA.COM  ... for around $720 ($320 setup plus $0.20 / 
>sq in x 2000 sq in minimum) you can get 115 circuit boards with 
>solder mask and silk screen ($6.30 per board if you can sell them 
>all).   Even if you sell a dozen of them,  it's cheaper than what 
>you are considering...
>----------------------------------------
>
>_________________________________________________________________
>Keep your kids safer online with Windows Live Family Safety.
>http://www.windowslive.com/family_safety/overview.html?ocid=TXT_TAGLM_WL_family_safety_072008
>_______________________________________________
>time-nuts mailing list -- time-nuts at febo.com
>To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>and follow the instructions there.
>
>
>--
>No virus found in this incoming message.
>Checked by AVG.
>Version: 7.5.524 / Virus Database: 270.5.5/1571 - Release Date: 
>7/24/2008 5:42 PM