[time-nuts] Phil's Fluke Monotronics equipment

phil fortime at bellsouth.net
Tue Jun 17 03:03:20 EDT 2008


Bill,
For specs, Tucker Still sells it.
http://www.planettest.com/java/jsp/product_partno103A_invid33188_condR.htm



----- Original Message ----- 
From: "WB6BNQ" <wb6bnq at cox.net>
To: "Discussion of precise time and frequency measurement" 
<time-nuts at febo.com>
Sent: Tuesday, June 17, 2008 2:53 AM
Subject: Re: [time-nuts] Phil's Fluke Monotronics equipment


> Phil,
>
> My unit is a model 100A and is in working condition.  So no hurry in that
> regard.  I am not sure what the difference is between it and the 103, 
> although I
> think they may be similar.
>
> The model 100A is a simple panel with the 2 inputs and a range selector 
> from
> 10E-6 to 10E-9.  There are output BNC's for driving a scope or chart 
> machine,
> etc..
>
> When you get the chance, I, and I'm sure, others would appreciate it, 
> thanks.
>
> Bill....WB6BNQ
>
>
> phil wrote:
>
>> Bill,
>> Just looked and it's Fluke/Montronics model 103A
>> It's a big manual if I recall, about the same size as the 207. I could 
>> scan
>> it later but need some block of time on that one.
>> If you "need" it, I could perhaps drop it off at a copy shop and let them
>> duplicate it. Most of those manuals had large pull-out schematics.
>>
>> Phil
>>
>> ----- Original Message -----
>> From: "WB6BNQ" <wb6bnq at cox.net>
>> To: "Discussion of precise time and frequency measurement"
>> <time-nuts at febo.com>
>> Sent: Tuesday, June 17, 2008 2:14 AM
>> Subject: Re: [time-nuts] Phil's Fluke Monotronics equipment
>>
>> > Phil,
>> >
>> > Would it be possible to scan those manuals and provide them to Didier
>> > Juges,
>> > KO4BB, for inclusion to his manual page ?
>> >
>> > The following URL is to his manual page and the first item is the
>> > instructions
>> > for doing the uploading.
>> >
>> > http://www.ko4bb.com/cgi-bin/manuals.pl
>> >
>> > Thank you in advance for your consideration.
>> >
>> > Bill....WB6BNQ
>> >
>> >
>> > phil wrote:
>> >
>> >> Going from memory, I think it's a 103. Yes I have the manuals for all
>> >> that
>> >> stuff I have.
>> >>
>> >> ----- Original Message -----
>> >> From: "WB6BNQ" <wb6bnq at cox.net>
>> >> To: "Discussion of precise time and frequency measurement"
>> >> <time-nuts at febo.com>
>> >> Sent: Tuesday, June 17, 2008 2:00 AM
>> >> Subject: [time-nuts] Phil's Fluke Monotronics equipment
>> >>
>> >> > Hi Phil,
>> >> >
>> >> > I am curious about your statement, below, concerning the separate 
>> >> > Fluke
>> >> > comparator.  Is it the Fluke Montronics model 100 ?
>> >> >
>> >> > If so, I have one of those and am wondering if you have the manual 
>> >> > for
>> >> > it
>> >> > ?
>> >> >
>> >> > Thanks,
>> >> >
>> >> > Bill....WB6BNQ
>> >> >
>> >> >
>> >> > phil wrote:
>> >> >
>> >> >> Speaking of the 207, is there any demand for that anymore? I still
>> >> >> have
>> >> >> an
>> >> >> old Fluke 207, the separate Fluke comparator, and a Motorola 
>> >> >> standard
>> >> >> we
>> >> >> used with it. Just wondered if perhaps I should put it on ebay or 
>> >> >> is
>> >> >> it a
>> >> >> waste of time.
>> >> >>
>> >> >> Phil
>> >> >
>> >> >
>> >> > _______________________________________________
>> >> > time-nuts mailing list -- time-nuts at febo.com
>> >> > To unsubscribe, go to
>> >> > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> >> > and follow the instructions there.
>> >>
>> >> _______________________________________________
>> >> time-nuts mailing list -- time-nuts at febo.com
>> >> To unsubscribe, go to
>> >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> >> and follow the instructions there.
>> >
>> >
>> > _______________________________________________
>> > time-nuts mailing list -- time-nuts at febo.com
>> > To unsubscribe, go to
>> > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> > and follow the instructions there.
>>
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to 
>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to 
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there. 




More information about the time-nuts mailing list