[time-nuts] Phil's Fluke Monotronics equipment

WB6BNQ wb6bnq at cox.net
Tue Jun 17 03:22:18 EDT 2008


Phil,

I had never seen a picture before.  The 103 is much more envolved than the 100A.
The 100A does not have meters, for example.

Thanks for the link,

Bill....WB6BNQ

phil wrote:

> Bill,
> For specs, Tucker Still sells it.
> http://www.planettest.com/java/jsp/product_partno103A_invid33188_condR.htm
>
> ----- Original Message -----
> From: "WB6BNQ" <wb6bnq at cox.net>
> To: "Discussion of precise time and frequency measurement"
> <time-nuts at febo.com>
> Sent: Tuesday, June 17, 2008 2:53 AM
> Subject: Re: [time-nuts] Phil's Fluke Monotronics equipment
>
> > Phil,
> >
> > My unit is a model 100A and is in working condition.  So no hurry in that
> > regard.  I am not sure what the difference is between it and the 103,
> > although I
> > think they may be similar.
> >
> > The model 100A is a simple panel with the 2 inputs and a range selector
> > from
> > 10E-6 to 10E-9.  There are output BNC's for driving a scope or chart
> > machine,
> > etc..
> >
> > When you get the chance, I, and I'm sure, others would appreciate it,
> > thanks.
> >
> > Bill....WB6BNQ
> >
> >
> > phil wrote:
> >
> >> Bill,
> >> Just looked and it's Fluke/Montronics model 103A
> >> It's a big manual if I recall, about the same size as the 207. I could
> >> scan
> >> it later but need some block of time on that one.
> >> If you "need" it, I could perhaps drop it off at a copy shop and let them
> >> duplicate it. Most of those manuals had large pull-out schematics.
> >>
> >> Phil
> >>
> >> ----- Original Message -----
> >> From: "WB6BNQ" <wb6bnq at cox.net>
> >> To: "Discussion of precise time and frequency measurement"
> >> <time-nuts at febo.com>
> >> Sent: Tuesday, June 17, 2008 2:14 AM
> >> Subject: Re: [time-nuts] Phil's Fluke Monotronics equipment
> >>
> >> > Phil,
> >> >
> >> > Would it be possible to scan those manuals and provide them to Didier
> >> > Juges,
> >> > KO4BB, for inclusion to his manual page ?
> >> >
> >> > The following URL is to his manual page and the first item is the
> >> > instructions
> >> > for doing the uploading.
> >> >
> >> > http://www.ko4bb.com/cgi-bin/manuals.pl
> >> >
> >> > Thank you in advance for your consideration.
> >> >
> >> > Bill....WB6BNQ
> >> >
> >> >
> >> > phil wrote:
> >> >
> >> >> Going from memory, I think it's a 103. Yes I have the manuals for all
> >> >> that
> >> >> stuff I have.
> >> >>
> >> >> ----- Original Message -----
> >> >> From: "WB6BNQ" <wb6bnq at cox.net>
> >> >> To: "Discussion of precise time and frequency measurement"
> >> >> <time-nuts at febo.com>
> >> >> Sent: Tuesday, June 17, 2008 2:00 AM
> >> >> Subject: [time-nuts] Phil's Fluke Monotronics equipment
> >> >>
> >> >> > Hi Phil,
> >> >> >
> >> >> > I am curious about your statement, below, concerning the separate
> >> >> > Fluke
> >> >> > comparator.  Is it the Fluke Montronics model 100 ?
> >> >> >
> >> >> > If so, I have one of those and am wondering if you have the manual
> >> >> > for
> >> >> > it
> >> >> > ?
> >> >> >
> >> >> > Thanks,
> >> >> >
> >> >> > Bill....WB6BNQ
> >> >> >
> >> >> >
> >> >> > phil wrote:
> >> >> >
> >> >> >> Speaking of the 207, is there any demand for that anymore? I still
> >> >> >> have
> >> >> >> an
> >> >> >> old Fluke 207, the separate Fluke comparator, and a Motorola
> >> >> >> standard
> >> >> >> we
> >> >> >> used with it. Just wondered if perhaps I should put it on ebay or
> >> >> >> is
> >> >> >> it a
> >> >> >> waste of time.
> >> >> >>
> >> >> >> Phil
> >> >> >
> >> >> >
> >> >> > _______________________________________________
> >> >> > time-nuts mailing list -- time-nuts at febo.com
> >> >> > To unsubscribe, go to
> >> >> > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> >> >> > and follow the instructions there.
> >> >>
> >> >> _______________________________________________
> >> >> time-nuts mailing list -- time-nuts at febo.com
> >> >> To unsubscribe, go to
> >> >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> >> >> and follow the instructions there.
> >> >
> >> >
> >> > _______________________________________________
> >> > time-nuts mailing list -- time-nuts at febo.com
> >> > To unsubscribe, go to
> >> > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> >> > and follow the instructions there.
> >>
> >> _______________________________________________
> >> time-nuts mailing list -- time-nuts at febo.com
> >> To unsubscribe, go to
> >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> >> and follow the instructions there.
> >
> >
> > _______________________________________________
> > time-nuts mailing list -- time-nuts at febo.com
> > To unsubscribe, go to
> > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> > and follow the instructions there.
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.




More information about the time-nuts mailing list