[time-nuts] 468-DC NBS Time receiver

[Glenn Little WB4UIV]

Thank you for the reply and the links to the resources. I may use 
this as a slave display from another time generator. At least I will 
not waste my time trying to get this to function as it was intended.

Thanks
73
Glenn
WB4UIV

At 12:57 PM 5/28/2008, you wrote:


>----- Original Message ----
>From: Glenn Little WB4UIV <glennmaillist at bellsouth.net>
>To: Time-Nuts list <time-nuts at febo.com>
>Sent: Monday, May 26, 2008 10:43:26 PM
>Subject: [time-nuts] 468-DC NBS Time receiver
>
>I found one of these in my stuff. Is it good for anything but parts?
>As I understand it, the service that this received has been shut down.
>
>Thanks
>73
>Glenn
>WB4UIV
>Correct no time service, the only other propose I can think of is 
>maybe a mod to look at the other data on this channel, "Data 
>Collection Platform interrogation" aka DCPI. Don't know if this 
>channel is used all the time as it is reported to interfere with 
>another sensor on the sats. And if you are setting up a time musumn...
>
>Link for info: http://rsd.gsfc.nasa.gov/goes/text/databook/section08.pdf
>Disconnect notice: http://noaasis.noaa.gov/NOAASIS/ml/nisttime.html
>Operating and service manual 468-DC : http://www.to-way.com/468dc.pdf
>Info on the Goes Sat : 
>http://directory.eoportal.org/presentations/224/7385.html
>http://noaasis.noaa.gov/DCS/docs/uim.pdf
>
>Stanley
>
>
>
>_______________________________________________
>time-nuts mailing list -- time-nuts at febo.com
>To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>and follow the instructions there.
>
>
>
>
>
>_______________________________________________
>time-nuts mailing list -- time-nuts at febo.com
>To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>and follow the instructions there.