[time-nuts] AC cord or connector for 5061A

[Bruce Griffiths]

Try:

http://www.galco.com/scripts/cgiip.exe/wa/wcat/itemdtl.htm?pnum=DMS3106A18-22S-DDK

Bruce

J. L. Trantham wrote:
> I am aware of the connection issue but I can't find the connectors.  Are
> they still available or should I change both the chassis connector and
> mating connector to something that I can find?
>
> Thanks,
>
> Joe
>
> -----Original Message-----
> From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
> Behalf Of Tom Van Baak
> Sent: Saturday, July 18, 2009 10:45 PM
> To: Discussion of precise time and frequency measurement
> Subject: Re: [time-nuts] AC cord or connector for 5061A
>
>
>   
>> Does anyone know of a source for a power cord for the 5061A (or 5061B, 
>> 5065A, etc.)?  I am looking for 3 cords or the connector that mates 
>> with AC connector on the back.
>>
>> The AC Cord is HP part number 1251-2457 and the connector that mates 
>> with the connector on the back is a Cannon MS3106A-18-22SW.
>>
>> Thanks in advance.
>>
>> Joe
>>     
>
> See if this helps.
>
> http://www.leapsecond.com/museum/hp5065a/conn.htm
>
> Best to open the bottom to make sure your unit has pins
> that match the schematic.
>
> /tvb
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
>