[time-nuts] AC cord or connector for 5061A

[John Ackermann N8UR]

I got some from Digi-key a year or so ago.  Unfortunately, I don't 
recall the DK part number, but I recall I had to do a cross-reference 
from the Cannon part number to another manufacturer (I think AMP) and 
that's what DK had.

John
----

J. L. Trantham said the following on 07/18/2009 11:58 PM:
> I am aware of the connection issue but I can't find the connectors.  Are
> they still available or should I change both the chassis connector and
> mating connector to something that I can find?
> 
> Thanks,
> 
> Joe
> 
> -----Original Message-----
> From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
> Behalf Of Tom Van Baak
> Sent: Saturday, July 18, 2009 10:45 PM
> To: Discussion of precise time and frequency measurement
> Subject: Re: [time-nuts] AC cord or connector for 5061A
> 
> 
>> Does anyone know of a source for a power cord for the 5061A (or 5061B, 
>> 5065A, etc.)?  I am looking for 3 cords or the connector that mates 
>> with AC connector on the back.
>>
>> The AC Cord is HP part number 1251-2457 and the connector that mates 
>> with the connector on the back is a Cannon MS3106A-18-22SW.
>>
>> Thanks in advance.
>>
>> Joe
> 
> See if this helps.
> 
> http://www.leapsecond.com/museum/hp5065a/conn.htm
> 
> Best to open the bottom to make sure your unit has pins
> that match the schematic.
> 
> /tvb
> 
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
> 
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.