[time-nuts] time-nuts Digest, Vol 56, Issue 71
bruce.griffiths at xtra.co.nz
Mon Mar 30 22:14:29 UTC 2009
Probably the higher jitter and periodic phase modulation due to
simultaneous switching of multiple outputs at different frequencies.
The magnitude of the latter will depend on the loads driven by each output.
The cure is to use an external flipflop to resynchronise the outputs to
the 10Mhz clock.
Kit Scally wrote:
> What's wrong with Tom's (/tvb) PIC divider ?
> Message: 2
> Date: Sun, 29 Mar 2009 20:28:57 -0700
> From: Bill Janssen <billj at ieee.org>
> Subject: [time-nuts] state of the art devide by ten
> To: Discussion of precise time and frequency measurement
> <time-nuts at febo.com>
> Message-ID: <49D03C79.8000000 at ieee.org>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
> I want to construct a divide by ten or a divide by 100 frequency
> divider. This is to take my 10 MHz. from my
> Rubidium to 1 MHz. or 100 KHz.
> I could use the spare 74xx90 chips ( which I have) but I would like to
> make some thing useful for future
> uses. What would be a "through the hole" type of IC that would have less
> jitter than a 74xx90. I CAN do
> surface mount if I have to.
> Bill K7NOM
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
More information about the time-nuts