[time-nuts] GPSDO Alternatives
lists at rtty.us
Fri Dec 7 02:07:59 UTC 2012
If all you want is a "something" locked to a GPS:
Take the pps from the GPS and hook it to an AD9548. You probably will need a 50 cent CPU to set up the registers. No muss, no fuss, nothing to invent or design.
Weather it does what you need to do is an entirely different question. Without a defined objective / need / performance goal this could go on for a couple hundred years…..
On Dec 6, 2012, at 7:43 PM, Chris Albertson <albertson.chris at gmail.com> wrote:
> What if the OCXO had a sine wave output and then you used the PPS leading
> edge to gate the sine wave to a sample and hold. then the sample is
> measured by the Arduino's ADC? I think(?) you get a 10-bit ADC or is it
> 8-bits. The problem is the required speed of the sample and hold, maybe
> not easy to build
> Chris Albertson
> Redondo Beach, California
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
More information about the time-nuts