[time-nuts] SSR-6t Connector

David Martin drmartin at ivietechnologies.com
Thu Dec 20 15:16:01 UTC 2012


I had a Motorola M12+ all hooked up with a RF pigtail and data header so I
just unplugged the Motorola and plugged in the SSR-6t.

The data connector was purchased from digikey several years ago and the
details have been lost in the dust.

However it looks like

http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=A33546-ND

I'm unhappy with the one I'm using as the contacts spring pressure is weak
against the connector pin -- I will have to consider looking for a more
"firm" fitting data connector.

The RF pigtail was also obtained years ago from data-alliance.net - their
P3B adapter cable.

See
http://www.data-alliance.net/servlet/-strse-800/MCX-BNC-female-Adapter/Detail

- Sent from my iPhone -
Please Reply To
David Martin
drmartin at ivietechnologies.com
801-372-0978

Just curious,
what connector/pigtail/adapter board did you use to access the 2x5 1.27mm
pitch connector on your SSR-6T.
Thanks,
Dale NV8U


More information about the time-nuts mailing list