[time-nuts] FE-5680A Voltage tolerance
EWKehren at aol.com
EWKehren at aol.com
Fri Jan 20 01:35:58 UTC 2012
As soon as my next unit comes in I will run some controlled tests. This one
refuses to show aging with week 9 up in two days. I will use it for other
tests before I take it appart.
Bert
In a message dated 1/19/2012 8:18:10 P.M. Eastern Standard Time,
ed_palmer at sasktel.net writes:
I would expect the RF circuitry to handle a lower voltage without too
much trouble. However, a lower input voltage means it will take longer
for the ovens to come up to temperature. Until they stabilize, a lock
probably won't happen.
Once the unit has warmed up and locked, how low can you go and still
maintain lock? As you drop the voltage, the ovens will run closer to
full on. Once you reach the point where one or more of the ovens are
full on, further voltage reduction will quickly cause issues.
Ed
On 1/19/2012 5:45 PM, gonzo . wrote:
> Experiment for the day.
> I thought I'd follow Dons quote and see how tolerant my unit is.
> My benchmark is at 15.5V it locks in about 3min.
> I backed off the supply to 10.8V and the lock time (from cold) is 8min.
>
> I thought this was interesting given several people report they are
unable to get a lock when running lower voltage.
>
> ian
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
More information about the time-nuts
mailing list