[time-nuts] Trimble SMT board
Erno Peres
ernieperes at aol.com
Mon Jun 25 12:15:18 UTC 2012
Azelio,
As I said NO any type of msg comes out from the board....only When I use the " TrimbleStudio SMT " software which seems to me it sending some kind of initialization to the board.....
Rgds Ernie.
-----Original Message-----
From: Azelio Boriani <azelio.boriani at screen.it>
To: Discussion of precise time and frequency measurement <time-nuts at febo.com>
Sent: Mon, Jun 25, 2012 2:06 pm
Subject: Re: [time-nuts] Trimble SMT board
A quick look at the Trimble Resolution SMT GPS revealed that the TSIP
acket 0x7A can manage the NMEA output: what sentences and their time
nterval so the TrimbleStudio must have that option.
On Mon, Jun 25, 2012 at 1:58 PM, Azelio Boriani <azelio.boriani at screen.it>wrote:
> It's easy: let it run with the power on, what else? What exactly do you
mean: no PC and what instead of the PC? Trimble products generally use the
TSIP protocol, not a human readable one like the NMEA. Yes, the NMEA isn't
easy to read but usually you can figure out date, time, lat/lon and 3D fix
present or not. With the TrimbleStudio you can configure the GPS to put out
the NMEA sentences (I think, I have no experience with the SMT but usually
the GPSes from Trimble can be configured to some extent).
On Mon, Jun 25, 2012 at 1:18 PM, Erno Peres <ernieperes at aol.com> wrote:
>
> Hi,
>
> anybody having some experience with this board..????
> I have the following problem....after power on the board it does not
> output any msg only if I use the " TrimbleStudio SMT " software......on
> my PC......
> Is there any solution to use the board without the PC/software ???????
>
> Thanks a lot for any usefull advise.
>
> Rgds Ernie.
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
______________________________________________
ime-nuts mailing list -- time-nuts at febo.com
o unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
nd follow the instructions there.
More information about the time-nuts
mailing list