[time-nuts] HP-53132A Faded and flickering display

Azelio Boriani azelio.boriani at screen.it
Fri Nov 2 16:34:08 UTC 2012


You will be using the counter much on the GPIB than looking to the display,
so try to keep the unit untouched. Better to use it and think about another
one, now that you have one, you are not in a hurry so you can select a
better one. You can also hunt for an SR620 or a Wavecrest... 25pS (or less)
instead of 150pS is better. Isn't it?

On Fri, Nov 2, 2012 at 5:24 PM, Edgardo Molina <xe1xus at amsat.org> wrote:

> Dear Group,
>
> Good morning! I just got my first HP-53132A frequency counter and Prologix
> GPIB-USB converter. Now I can do some measurements and I am excited about
> it.  Everything looks promising. Condition of the instrument on the outside
> is like new, controls responsive and no fading in lettering at the buttons.
> Connectors are not worn or damaged, original connectors. The unit has been
> tested and works OK, probably not with adequate calibration but that is not
> an issue now, I can always calibrate it later.
>
> What worries me is the display. Even though being an Agilent built unit,
> it has probably more hours on it than a seldom used HP built unit. The
> flourescent display is fading, not all the digits show consistent
> illumination levels. The left-most digits show some flickering at some of
> their segments. It is readable in the end, but I am terribly disappointed
> about it.
>
> Does anybody know if there is a cure for this? Or should I start saving
> for a better unit.
>
> I am not afraid of the screwdriver or the soldering iron if someones
> suggests a display overhaul. Thank you!
>
>
> Regards,
>
>
>
> Edgardo Molina
> Dirección IPTEL
>
> www.iptel.net.mx
>
> T : 55 55 55202444
> M : 04455 20501854
>
> Piensa en Bits SA de CV
>
>
>
> Información anexa:
>
>
>
>
> CONFIDENCIALIDAD DE INFORMACION
>
> Este mensaje tiene carácter confidencial. Si usted no es el destinarario
> de este mensaje, le suplicamos se lo notifique al remitente mediante un
> correo electrónico y que borre el presente mensaje y sus anexos de su
> computadora sin retener una copia de los mismos. Queda estrictamente
> prohibido copiar este mensaje o hacer usode el para cualquier propósito o
> divulgar su en forma parcial o total su contenido. Gracias.
>
>
> NON-DISCLOSURE OF INFORMATION
>
> This email is strictly confidential and may also be privileged. If you are
> not the intended recipient please immediately advise the sender by replying
> to this e-mail and then deleting the message and its attachments from your
> computer without keeping a copy. It is strictly forbidden to copy it or use
> it for any purpose or disclose its contents to any third party. Thank you.
>
>
>
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>


More information about the time-nuts mailing list