[time-nuts] 5061A AC Power connector

J. L. Trantham jltran at att.net
Sun Nov 25 16:40:09 UTC 2012


I stand corrected.

My 5089 definitely uses the same connector as the 5061A.

However, my 5085 uses a smaller connector, a DMS3106A10SL-3S.

http://www.galco.com/buy/DDK/DMS3106A10SL-3S

It uses a smaller clamp and strain relief, a DMS3057-4A, though I had to
remove the strain relief due to the size of the cable I used to connect to
120 VAC.

http://www.galco.com/buy/DDK/DMS3057-4A

Sorry for the misleading info, but, perhaps, there are two different
connectors for the 5085, depending on age/serial number of the equipment.

Joe

-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
Behalf Of J. L. Trantham
Sent: Saturday, November 24, 2012 9:36 PM
To: 'Discussion of precise time and frequency measurement'
Subject: Re: [time-nuts] 5061A AC Power connector


Paul,

According to the 5089 manual, the power connector is the same.  Both the
5085 and 5089 call for the same HP part number for the AC power cord.
Therefore, I suspect they are the same.

I have a 5085 hooked up and I can make sure tomorrow if you need it.

Joe

-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
Behalf Of paul swed
Sent: Saturday, November 24, 2012 9:06 PM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] 5061A AC Power connector


I hoped it helped also. I know it did for me. Will order 2 sets so I can
finally have real connectors on the 5061 and 5065. I wonder if its the same
for the standby power supply may need to order 3. Regards Paul WB8TSL

On Sat, Nov 24, 2012 at 9:35 PM, J. L. Trantham <jltran at att.net> wrote:

> Pete,
>
> In the US, Galco sells a DDK product that works well.  The connector
> and shell are a DMS3106A18-22S.
>
> http://www.galco.com/buy/DDK/DMS3106A18-22S
>
> You will also need a clamp and strain relief.  I use a DMS3057-10A.
>
> http://www.galco.com/buy/DDK/DMS3057-10A
>
> It is the same connector as a 5065A though you have to be careful
> about the wiring.  Some of the 5065A's are the same as the 5061A and 
> others are different.
>
> Hope this helps.
>
> Joe
>
> -----Original Message-----
> From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com]
> On Behalf Of Pete Lancashire
> Sent: Saturday, November 24, 2012 6:51 PM
> To: Discussion of precise time and frequency measurement
> Subject: [time-nuts] 5061A AC Power connector
>
> What is the MS type for the power plug for a 5061A ?
>
> I could not find it in the PDF I have.
>
> -pete
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.


_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.




More information about the time-nuts mailing list