[time-nuts] 5061A AC Power connector

[paul swed]

Thanks will do some checking and order the right connectors
Paul.

On Sun, Nov 25, 2012 at 11:40 AM, J. L. Trantham <jltran at att.net> wrote:

> I stand corrected.
>
> My 5089 definitely uses the same connector as the 5061A.
>
> However, my 5085 uses a smaller connector, a DMS3106A10SL-3S.
>
> http://www.galco.com/buy/DDK/DMS3106A10SL-3S
>
> It uses a smaller clamp and strain relief, a DMS3057-4A, though I had to
> remove the strain relief due to the size of the cable I used to connect to
> 120 VAC.
>
> http://www.galco.com/buy/DDK/DMS3057-4A
>
> Sorry for the misleading info, but, perhaps, there are two different
> connectors for the 5085, depending on age/serial number of the equipment.
>
> Joe
>
> -----Original Message-----
> From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
> Behalf Of J. L. Trantham
> Sent: Saturday, November 24, 2012 9:36 PM
> To: 'Discussion of precise time and frequency measurement'
> Subject: Re: [time-nuts] 5061A AC Power connector
>
>
> Paul,
>
> According to the 5089 manual, the power connector is the same.  Both the
> 5085 and 5089 call for the same HP part number for the AC power cord.
> Therefore, I suspect they are the same.
>
> I have a 5085 hooked up and I can make sure tomorrow if you need it.
>
> Joe
>
> -----Original Message-----
> From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
> Behalf Of paul swed
> Sent: Saturday, November 24, 2012 9:06 PM
> To: Discussion of precise time and frequency measurement
> Subject: Re: [time-nuts] 5061A AC Power connector
>
>
> I hoped it helped also. I know it did for me. Will order 2 sets so I can
> finally have real connectors on the 5061 and 5065. I wonder if its the same
> for the standby power supply may need to order 3. Regards Paul WB8TSL
>
> On Sat, Nov 24, 2012 at 9:35 PM, J. L. Trantham <jltran at att.net> wrote:
>
> > Pete,
> >
> > In the US, Galco sells a DDK product that works well.  The connector
> > and shell are a DMS3106A18-22S.
> >
> > http://www.galco.com/buy/DDK/DMS3106A18-22S
> >
> > You will also need a clamp and strain relief.  I use a DMS3057-10A.
> >
> > http://www.galco.com/buy/DDK/DMS3057-10A
> >
> > It is the same connector as a 5065A though you have to be careful
> > about the wiring.  Some of the 5065A's are the same as the 5061A and
> > others are different.
> >
> > Hope this helps.
> >
> > Joe
> >
> > -----Original Message-----
> > From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com]
> > On Behalf Of Pete Lancashire
> > Sent: Saturday, November 24, 2012 6:51 PM
> > To: Discussion of precise time and frequency measurement
> > Subject: [time-nuts] 5061A AC Power connector
> >
> > What is the MS type for the power plug for a 5061A ?
> >
> > I could not find it in the PDF I have.
> >
> > -pete
> >
> > _______________________________________________
> > time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to
> > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> > and follow the instructions there.
> >
> >
> > _______________________________________________
> > time-nuts mailing list -- time-nuts at febo.com
> > To unsubscribe, go to
> > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> > and follow the instructions there.
> >
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>