[time-nuts] altinex switches
Robert LaJeunesse
rlajeunesse at sbcglobal.net
Thu Feb 21 16:22:11 EST 2013
I've been known to just stack a 150 Ohm 1% chip resistor on top of a 75 Ohm chip
resistor to bring the result down to 50 Ohms. Beats having to 1) remove the old
part, 2) clean up the pads, then 3) get the new one soldered down.
Bob L.
________________________________
From: Arthur Dent <golgarfrincham at yahoo.com>
To: "time-nuts at febo.com" <time-nuts at febo.com>
Sent: Thu, February 21, 2013 4:13:48 PM
Subject: [time-nuts] altinex switches
... it should be easy to switch it to 50 ohms although it may not make any real
difference.
More information about the time-nuts
mailing list