[time-nuts] GPS Antenna Install

DaveH info at blackmountainforge.com
Sun Mar 10 20:46:05 EDT 2013

Quite the nice QTH you have there!  Wish I had an East Coast trip scheduled
-- would love to visit.


> -----Original Message-----
> From: time-nuts-bounces at febo.com 
> [mailto:time-nuts-bounces at febo.com] On Behalf Of Martin A Flynn
> Sent: Sunday, March 10, 2013 08:20
> To: Discussion of precise time and frequency measurement
> Subject: [time-nuts] GPS Antenna Install
> Sorry about the blank messages - not sure why I could not reply to my 
> own message...
> In any case,  thanks to the help from  kind folks on the list, the 
> TS-2100L in in the rack at the N2MO amateur radio station at InfoAge.
> The N2MO team spent yesterday doing the prep work to mount a 27dB 
> antenna on the gable end of the building, using 1/2 heliax for feed 
> line, with a Polyphaser  DGXZ + 06NFNF installed in the line 
> before it 
> enters the building.
> The antenna mount pipe and the Polyphaser are grounded via #2 copper 
> cable that will be exothermic welded to the ground rod.
> Thanks again!
> Martin Flynn
> PS - Now that the precision time bug has bitten, the team, is 
> considering a Rubidium standard!
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to 
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.

More information about the time-nuts mailing list