[time-nuts] OT - DC-10 gyros
nerd at verizon.net
Wed Mar 27 22:35:40 EDT 2013
I have a little dynamotor somewhere which makes 3 phase 400 Hz. Tiny little
thing! Only puts out like 15 VA, and not very noisy either. IIRC is was called
an "Instrument inverter"
On 3/27/2013 9:55 PM, Bob Camp wrote:
> If three phase is actually needed, I'd suggest something like a cheap PIC with three PWM outputs. Fairly simple R/C's on the outputs should be plenty good enough to filter out any crud. Good frequency stability / accurate phase shift / cheap. What's not to like ….
> On Mar 27, 2013, at 9:44 PM, kb0ebg at juno.com wrote:
>> Bill Ezell;
>> Your Gyro may require 3 phase, 400 cps, 28 vac, Sine wave.
>> A simple "Buffered Phase Shift Oscillator" for 400 cps can create the Sine Wave.
>> https://www.circuitlab.com/circuit/h6v28g/buffered-phase-shift-oscillator/https://www.circuitlab.com/circuit/bakd83/phase-shift-oscillator-ii/You will need to add an AGC to the output for frequency stability.
>> A "3 Phase Generator" can create the 3 phase output.https://www.circuitlab.com/circuit/m4u5nw/3-phase-generator/ Add 3 Amplifiers (one for each phase) to reach voltage/power.
>> If the Gyro is directional, it will take several hours to stabilize.
>> Refinance your home now
>> Loans under 729K usually qualify for US GOV backed refinance programs
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1430 / Virus Database: 2641/5707 - Release Date: 03/27/13
More information about the time-nuts