[time-nuts] OT - DC-10 gyros

Bob Camp lists at rtty.us
Wed Mar 27 21:55:32 EDT 2013


If three phase is actually needed, I'd suggest something like a cheap PIC with three PWM outputs. Fairly simple R/C's on the outputs should be plenty good enough to filter out any crud. Good frequency stability / accurate phase shift / cheap. What's not to like ….


On Mar 27, 2013, at 9:44 PM, kb0ebg at juno.com wrote:

> Bill Ezell;
> Your Gyro may require 3 phase, 400 cps, 28 vac, Sine wave.
> A simple "Buffered Phase Shift Oscillator" for 400 cps can create the Sine Wave.
> https://www.circuitlab.com/circuit/h6v28g/buffered-phase-shift-oscillator/https://www.circuitlab.com/circuit/bakd83/phase-shift-oscillator-ii/You will need to add an AGC to the output for frequency stability.
> A "3 Phase Generator" can create the 3 phase output.https://www.circuitlab.com/circuit/m4u5nw/3-phase-generator/ Add 3 Amplifiers (one for each phase) to reach voltage/power.
> If the Gyro is directional, it will take several hours to stabilize.
> Carl  
> ____________________________________________________________
> Refinance your home now
> Loans under 729K usually qualify for US GOV backed refinance programs
> http://thirdpartyoffers.juno.com/TGL3131/5153a0bf2812c20bf6124st04duc
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.

More information about the time-nuts mailing list