[time-nuts] FE-5680A control programs
Chuck Forsberg WA7KGX N2469R
caf at omen.com
Fri May 24 15:02:01 EDT 2013
I added a command to display or change the frequency offset to my ZCOMM
To use it:
fe [new offset]
On 05/24/2013 05:06 AM, Ziggy9 wrote:
> A few months ago Fabio Eboli posted some Python functions that might be useful. I haven't used or tested them myself, but they might be of interest. Still up on pastebin at
> I don't know if Fabio has done any further work on this but perhaps he'll chime in here.
> On May 24, 2013, at 0:22, Chris Albertson <albertson.chris at gmail.com> wrote:
>> You have been collecting programs? I did not know there were any to
>> collect. Do you have a list? I don't have much use for a .exe file but
>> is your are source codes available that would be great.
>> On Thu, May 23, 2013 at 4:44 PM, EB4APL <eb4apl at cembreros.jazztel.es> wrote:
>>> Since I bought my FE-5680A (10 MHz, 1 PPS variety), I have been collecting
>>> control programs for it and keeping then in reserve. Now that I'm going to
>>> box it with a distribution amp I tried some of them, first of all to adjust
>>> the frequency against the GPS. I used Bob Campbel's VK4XV
>>> "Fe5680Calibrator.exe" with good results. I have other programs which
>>> interrogates the device and shows the hex dumps, but I would like to know
>>> if there is a windows program that allows to send other that the offset
>>> related commands to the device and get the responses not in hex but
>>> translated to plain language. In fact I don't know if there are
>>> housekeeping commands for reading thinks like the lock status or the lamp
>>> voltage like the analog outputs of the FRS-C and others.
>>> Thanks in advance,
>>> Ignacio EB4APL
>>> time-nuts mailing list -- time-nuts at febo.com
>>> To unsubscribe, go to https://www.febo.com/cgi-bin/**
>>> and follow the instructions there.
>> Chris Albertson
>> Redondo Beach, California
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
Chuck Forsberg WA7KGX caf at omen.com www.omen.com
Developer of Industrial ZMODEM(Tm) for Embedded Applications
Omen Technology Inc "The High Reliability Software"
10255 NW Old Cornelius Pass Portland OR 97231 503-614-0430
More information about the time-nuts