[time-nuts] EZGPIB Question

Lizeth Norman normanlizeth at gmail.com
Wed Nov 20 11:42:44 EST 2013


The programming of the ENET/100 has to be done with an older ver of Labview
(7.1 IIRC), something that has no later than win 2k as an operating system.
I had one of these and went through the setup of the ip address. Once it
worked, it was like a hardware controller. (using LV 8.0)


On Wed, Nov 20, 2013 at 11:32 AM, Dr. David Kirkby <drkirkby at gmail.com>wrote:

> On 20 November 2013 02:35, paul swed <paulswedb at gmail.com> wrote:
> > Don
> > A couple of comments. I have the old ethernet 100 also. As I recall it
> > would only work up until windows 98 or 2000..
>
> I don't think that is true
>
> http://www.ni.com/download/ni-488.2-3.1.2/4360/en/
>
> supports windows 8 and supports both GPIB-ENET/100
> & GPIB-ENET/1000.
>
>
> Dave
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>


More information about the time-nuts mailing list