[time-nuts] EZGPIB Question

[John Miles]

> -----Original Message-----
> From: time-nuts-bounces at febo.com [mailto:time-nuts-
> bounces at febo.com] On Behalf Of Lizeth Norman
> Sent: Wednesday, November 20, 2013 8:43 AM
> To: Discussion of precise time and frequency measurement
> Subject: Re: [time-nuts] EZGPIB Question
> 
> The programming of the ENET/100 has to be done with an older ver of
> Labview
> (7.1 IIRC), something that has no later than win 2k as an operating
system.
> I had one of these and went through the setup of the ip address. Once it
> worked, it was like a hardware controller. (using LV 8.0)

No personal experience, but apparently it can be done with a third-party
utility as well.  Search http://www.ke5fx.com/gpib/faq.htm for the term
"GPIB-ENET" and  you'll (eventually) find W2HX's instructions.

-- john, KE5FX
Miles Design LLC