[time-nuts] Looking at this picture - where is the temperature sensor?

[Alan Kamrowski II]

Hi Everyone,

 

http://www.ko4bb.com/Manuals/05%29_GPS_Timing/RFTG-m/RFTG-m-rb_L105A_Hi_res/
lucent%283%29.jpg

 

I'm trying to figure out where the RFTG gets its Rb module temperature and I
think it has to be on the board above most likely in the upper left.  The
cutout is where the RB module is mounted and it has a heat sink tape or some
sort of material on the bottom to help it thermally connect with the RFTG
case.  The PCB also has a thermal connection to the case through the pcb
mount in the upper left..

 

Thanks,

 

Alan