[time-nuts] New NTBW50AA

[Bob Camp]

Hi

The time constant / oscillator tuning data does not save to eeprom on the NTBW50 and similar units. Works fine on a TBolt….

Bob

On Sep 10, 2013, at 12:07 PM, Charles Steinmetz <csteinmetz at yandex.com> wrote:

> Dave wrote:
> 
>> Also how do I set the time constant, I can't find it anywhere except if I do the &a command but it resets back to 100s with a new start.
> 
> Does the TC not get saved when you "save to EPROM"?  It does with a Thunderbolt.
> 
> Also, a number of people have expressed confusion with making LH display parameters "stick" from one session to the next.  Learn the power of the "slash" commands!  Many LH parameters can be pre-set at launch using slash ("/") commands passed to LH in the launch command.  (LH can also read a configuration or ".ini" file for these parameters, but I have not tried this.)
> 
> If you look at the index you get when you hit <Spacebar>, one of the choices will be to view the slash commands.  (You can also use the slash commands while LH is running, but they will not be saved.  For that, you need to pass them to LH at each launch, either in the launch command or in a configuration file.)
> 
> Best regards,
> 
> Charles
> 
> 
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.