[time-nuts] Wall clock stepper driver board and funky firmware

Patrick Tudor ptudor at ptudor.net
Tue Dec 2 01:00:03 EST 2014


> On Dec 1, 2014, at 9:49 PM, Mark Sims <holrum at hotmail.com> wrote:
> 
> I was scanning through the shared PCB projects on OSHPARK.COM <http://oshpark.com/> and came upon this little driver for stepper motor wall clocks:
> https://oshpark.com/shared_projects/gpkIWuAW <https://oshpark.com/shared_projects/gpkIWuAW>
> There is a link to github with various AVR firmwares for doing different random ticking clocks,  a Mars clock, a tide clock, and a sidereal clock.
> https://github.com/nsayer/Crazy-Clock <https://github.com/nsayer/Crazy-Clock> 		 


That wall clock stepper is a neat project. Fairly popular on Tindie.
You can see a couple panelized boards assembled in this picture on Twitter:

https://twitter.com/SmallBatchA/status/537258915613138944

His tiny design is significantly more popular, and significantly cheaper, than my own (albeit GPS PPS) clock on Tindie:

Crazy Clock: https://www.tindie.com/products/nsayer/crazy-clock/

Jemma Clock: https://www.tindie.com/products/ptudor/jemma-clock/

( And even more clocks: https://www.tindie.com/m/Clocks/ )

Patrick


-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 3630 bytes
Desc: not available
URL: <http://www.febo.com/pipermail/time-nuts/attachments/20141201/c4bde176/attachment.bin>


More information about the time-nuts mailing list